Coding and Marking Technologies for the Pharmaceutical Industry

Worldwide pharmaceutical packaging demand has reached an annual growth rate of 5.3% making the world pharmaceutical packaging industry worth $24.3 billion in 2009.

Growth of the pharmaceutical packaging industry is expected to follow upward trends in global medication consumption, which will expand at a strong pace as aging demographic patterns lead to an increasing number of diseases and disorders. Furthermore, the adoption of stricter regulations and standards governing the production, storage, distribution and labelling of pharmaceuticals will boost global growth opportunities for packaging products and accessories.

Historically, pharmaceutical packaging requirements focused exclusively on preserving the quality of the enclosed medication and increasing the products' shelf lives. These requirements are now extended to cover such criteria as the prevention of product tampering and counterfeiting, the assurance of product dispensing accuracy, child protection and the promotion of patient compliance with product dosage schedules.

Pharmaceutical noncompliance is a tremendous problem in the US, resulting in an estimated $100 billion expense every year while being blamed for the deaths of over 125000 Americans annually (342 people every day). Ten percent of all hospital admissions are the result of pharmaceutical noncompliance and 23% of all nursing home admissions are as a result of people's inability to take their medications as prescribed. ¹

In February 2004, the FDA published the final version of 21 CFR Parts 201, 606 and 610 to reduce the number of medication errors in hospitals and healthcare settings. The rule specifies that the packaging of all human drugs be labelled with a linear bar code containing the National Drug Code (NDC) number that serves as a universal product identifier. This 10-digit code identifies the labeller/vendor, product, trade package size, the specific strength, the dosage and the formula for a specific firm.

According to the Healthcare Compliance Packaging Council (HCPC), the National Quality Forum (NQF) and FDA, the implementation of unit dose blister and strip packaging places a further restraint on the intentional or accidental misuse of pharmaceuticals. Furthermore, the EU specifies that all prescription drugs dispensed directly to patients be in a unit dose packaging. FDA describes unit dose packaging as the only packaging format that can accommodate bar codes on packaging labels for each dosage of medication dispensed to patients.²

Coding and marking technologies for the primary packaging of pharmaceuticals must constantly evolve to meet the emerging industry trends and associated regulations. Bar coding methods have been traditionally chosen according to three main criteria: 

 

  • the kind of data required to appear on the bar code (numeric symbols, alpha-numeric or special characters).
  • the amount of available space on which to print and the specific location of the bar code.
  • where the bar code needs to be placed near an edge, there is a considerable risk of misreads (when a scanner cannot read the bar code).

 

There is a wide variety of printers available for coding and marking pharmaceutical primary packaging including thermal transfer, inkjet, dot-matrix, laser, flexographic and colour change. It is not easy for companies to choose the appropriate technology that would suit their specific needs. The right choice depends upon the company's top priorities regarding legibility, cost, speed, ease-of-use, cleanliness and security.

 

Thermal transfer printers. These are more appropriate for production line bar code printing and are as sueful for printing one-off single labels as they are for producing thousands of labels. Specifically, thermal transfer printers produce high quality, legible and clear bar codes, as well as other types of codes including the increasingly commond DataMatrix 2-dimensional codes. Ink is dry-applied through heat dissipation and therefore there is no mess, no drying time and with the right match of ribbon and substrate, results are extremely durable. Such printers are relatively easy to install and maintain; easy to operate and are available in a wide range of print width capbilities, print resoultions and at prices from a few hundred Pounds/Euros to several thousands depending upon specification, duty cycle requirements and throughput. 

 

Inkjet printers. These are among the fastest units available on the market. Unfortunately, there are considerable limitations to what they can print. In addition, they require technically trained installers, frequent maintenance and can be quite messy. Another major downfall is that the print fades after successive use. Water-based inkjet fluids tend to streak and blur, while nonwater, soluble inkjet fluids produce a shine that reflects to the scanner and affects how the bar code is read. The suitability of such printers is something to carefully evaluate in conjunction with packaging suppliers. However for high volume and especially high volume with variable printing requirments, they are very versatile.

 

Dot-matrix printers. These printers produce low-quality codes with low contrast, although this depends on the ribbon used. They should be avoided for automatic identification (bar code) purposes especially where the codes go outside of the environment in which they are produced - i.e. into a supply-chain. They are slow, noisy and pretty much obsolete these days. 

 

Laser printers. These are off-line devices requiring a separate label applicator. A further disadvantage is that they are subject to toner flaking, meaning that they are unreliable for long-term bar code printing. 

 

Laser marking by ablation. This more recent method uses a high powered beam to ablate the bar code onto the label by burning away a black ink patch to form the white spaces by exposing the underlying substrate material. However, this method results in high emission levels and can also create problems for bar code resolution levels. Compared to other methods this is expensive and often requires high maintenance.

 

Flexographic printers. These produce high-quality images, thereby being most suitable for printing small characters but they can be costly to use and maintain because a plate change is required for every coding change. Typically used for high volume print runs involving one product and code.

 

Colour change technology. This is a noncontact, high resolution, low emission technique that generates high definition data, bar codes and graphics to an infinite array of materials. Combining chemistry, substrate conversion and laser energy, this process uses very low power laser light for the high speed, on-demand printing of variable information on primary packaging. The subsequent laser imaging process provides a means of marking without ablation and it does not require any ink or ribbons. Additionally, the technology is virtually maintenance free, non-toxic and environmentally friendly.

Colour change technology is equally suitable for any type of primary packaging substrate including flexible packaging, paper, board and plastics. The technology's versatility makes it ideal for a wide range of applications relating to coding, marking, and tracking and tracing. Because of the stability of the image produced, this solution provides extreme protection for brand integrity. 

 

Conclusion 

In summary, scientists working in the pharmaceutical packaging industry should base their choice of printing technology on three main criteria — first, the regulations governing pharmaceutical practice, second, their company's specific coding and marking needs, and third, the benefits and downfalls each particular method involves. Budget, flexibility, ease of installation, operation and the need for a back up method if a printing device stops working for any reason are other considerations. 

 

Verification & Quality Control of printed codes

 In house production of bar codes and matrix codes should be carefully monitored by the Quality Department using a Verifier that conforms to ISO/CEN specifications and provides reports and analysis into the integrity of the codes scanned, their structure, compliance to the standards and content. The ability to store the roports and tie them back to each production batch is vital in assuring customers and others in the supply chain that the codes will be scannable throughout their lifetime in the supply chain. See our pages on Bar Code Verification for further information and links to our inductry leading range of one and two dimensional verifiers.

  
References:

1. www.unitdose.org/

2. www.packworld.com/articles/Departments/17762.html

logoRea.gif  logoAim.gif logoZebra.gif logoMotorola.gif

Copywrite © 2010, Bar Code Systems     -     Company Registration No. 0387708266     -     66 Chiltern Street, London W1U 4JT