 |
REA Scan Check 3 - Technical Data
Technical Data REA ScanCheck 3
- CPU: ARM9 ® 32bit, 180MHz
- OS: ElinOS
- Memory: FlashROM: 16MB, RAM 32MB, expandable by internal MMC-Card
- Light Source: Laserclass 2, 670 nm
- Modulation: 5 MHz
- Scan speed: aprox. 45 Scans/s, 1 Mirror of 10 is used
- Aperture: selectable 6, 8, 10 and optional 20 mil
- Laser security: EN 60825
- Evaluations: According to ISO/IEC 15416, ANSI X3.182 and symbologies standards
- Software Options: Comparator, Article Look Up, TransWin32, optional codes
- Symbologies: EAN-13, UPC-A, UPC-E with/without ADD-ON, EAN-8, 2/5 Interleaved with/without check code, ITF-14, Frachtpost, Code 39 with/without check code, PZN, Code 32, Code 128, GS1-128 with/without check of content, new: GS1-Databar
- Optional symbologies: 2/5 3 Bars, 2/5 5 Bars, 2/5 IATA, 2/5 Baggage, 2/5 DHL Express ( Frachtpost-Code), Code39 Full ASCII, Code93, MSI, Plessey, Code128UPU, Code39UPU, Code39HIBC, Code128HIBC, Codabar Monarch (18), LAETUS Pharmacode, LAETUS MiniPharmaCode
- Interfaces: Printer via USB socket, type A PC-connection by 6-pin STEWART Compu-Shield plug
- Batteries: x 1.2 V / 2.700 mAh, NiMH, rechargeable, type AA
- Power supply: DC 9 Volt / 0,5A operating / 3A max charging included
- Display: Colour TFT Display, 320 x 240 Pixel, graphics
- Keyboard: 21 keys
- Housing: Aluminium, black painted
- Temperature: Operation 0 °C - +40 °C Storage -20 °C - +70 °C
- Humidity: max. 80 % relative, not condensing
- Size: 222 x 85 x 134 mm (L x W x H )
- Weight: 1.115 g, including batteries
- Maintenance: monthly calibration required
- Cleaning: Lens and red-light exit window with a non nappy cloth only.
Power supply for REA ScanCheck 3
- Input voltage: 100 –240 Volt AC / 47 – 63 Hz, 700mA
- Output voltage: 9 V / 3 A, electronic regulated, short cut resistant
- Case: Plastic ABS, black
- Temperature: Operation 0 °C - +65 °C Storage -20 °C - +65 °C
- Humidity: max. 80 % relative, not condensing
- Size: 100 x 80 x 65 (B x W x H)
- Weight: 300 g
- Maintenance: Maintenance free
- Primary socket: available for US, UK or EURO power plug standards, others on request
Thermal printer REA TD-GPT-U
- Batteries: NiMH-Battery pack 4,8V, 1.500 mAh, rechargeable
- Case: Plastic PC/ABS with 15 % Glass fibre, black
- Interface: Mini-USB-plug for REA ScanCheck 3 connection
- Power Connector: Low voltage barrel connector
- Printer: Direct thermal using a fixed thermal print head
- Resolution: 8 dots / mm (203 dpi), 384 dots in one print line
- Speed: max. 50 mm/s / 16 lines/s, 3 mm height
- Paper: direct thermal, wood free
- Paper width: 57.0 mm +/- 0.5 mm
- Diameter: max. 31 mm, Kern 7 mm, Länge ca. 11m bei 60g/m©˜
- Print width: max. 48 mm
- Temperature Operation 0 °C - +50 °C Storage -20 °C - +65 °C
- Humidity: 80 % relative, not condensing
- Size: 159 x 89 x 46 mm (L x W x H)
- Weight: 350 g
Plug in charger for direct thermal printer REA TD-GPT-U
- Only for in-house use
- Input voltage: 230 Volt AC / 50 Hz, 7,9W
- Output voltage: 6 V AC / 0,5 A, 3VA
- Connection: primary Euro power plug, others on request Secondary: low voltage barrel connector 5 mm, 2.5 mm
- Case: ABS plastic
- Temperature: Operation 0 + 50°C Storage -20 °C - +65 °C
- Humidity: max 80 % relative, not condensing
- Size: 55 x 48 x 80 mm (L x W x H) + cable length 170 cm
- Weight: 240 g
- Maintenance: Maintenance free
For further information, please contact us.
|
|
|
